Skip to main content
Smart Home in Guayaquil · Ecuador

Smart home automation in Guayaquil for homes, apartments and offices

We design and integrate lighting, climate, security, audio and networking for houses, apartments and offices across Guayaquil. One system, coordinated with your architect from the drawings, with the electronics in a documented technical rack.

  • 120+

    Delivered projects

  • 10+

    Years of experience

  • Control4

    Certified integrator

  • In-house team

    Installation never outsourced

What shapes system design in Guayaquil

Power cuts and voltage swings, humid heat all year, WiFi that has to get through concrete slabs, and houses that open directly onto the street. We design your system for those conditions.

  • Outages and voltage swings

    In April 2026, during a heat wave, parts of Guayaquil had unplanned power cuts, and local press reported appliances damaged by voltage swings when power came back. That is why the rack runs on its own circuit, with a surge suppressor that protects the equipment when power returns and a UPS that keeps it running for a limited time, depending on its battery.

    Checklist for your electrician on a new build
  • Façades and heat

    April is the hottest month in Guayaquil, and the humid heat holds the rest of the year. We study the orientation of each façade so thermostats and shades get ahead of heat peaks, and we schedule the air conditioning so the house is cool by the time you usually get home.

    Smart climate control
  • WiFi in houses, towers and offices

    In a multi-story house or an office, a single router from your provider rarely reaches every room, because each slab cuts the signal range. In towers such as those in Ciudad del Río, neighboring networks also compete for the same channels. We install wired access points on each floor or zone, powered over PoE from the rack, and tune each one based on on-site measurements.

    Wi-Fi 7 vs good engineering at home
  • Street-facing houses

    Outside a gated community, the façade is the first line of security. We define façade, parking and perimeter zones, separate access permissions for the people who live and work in the house, and deterrent lighting that switches on when an event occurs.

    Perimeter security
  • Outdoor areas

    We leave the audio cabling for the garden and terrace in place from the start, even if those zones go in later. The rainy season brings spells of thunderstorms, so outdoor equipment should have suitable protection.

    Multiroom audio and video

Offices and corporate spaces

We serve offices, coworking spaces, medical practices and retail spaces. In those settings a network outage brings work to a halt, so we design with redundancy, remote support and documentation for your internal team.

  • Meeting rooms

    Calibrated microphone, camera and audio, run from a single control panel.

    Office automation
  • Network, cameras and access

    Separate networks for guests, devices and administration, with cameras and access control by user profile.

  • Support for critical systems

    Care Plus is designed for corporate integration and Care Premium for companies with critical systems.

    DomuLab Care plans

Areas we serve in and around Guayaquil

Areas grouped by location, with the type of property found in each.

North

  • Urdesa
  • Miraflores
  • Kennedy
  • Kennedy Norte
  • Alborada

Houses, apartments and office buildings.

Vía a la Costa

  • Los Ceibos
  • Puerto Azul

Houses in the gated communities along the corridor.

Downtown and riverfront

  • Downtown
  • Ciudad del Río

Ciudad del Río is in Puerto Santa Ana. Tower apartments and offices.

Samborondón

  • Samborondón
  • Vía a Samborondón

They belong to a separate canton and have their own page.

Smart home in Samborondón

Daule

  • La Aurora

Part of Daule canton. Communities along Avenida León Febres-Cordero.

Why choose us

Certified Control4 integrator in Guayaquil

Control4 / Snap One certification gives us access to manufacturer support. One engineering team, which also installs and programs Lutron RadioRA 3, is accountable for your project from specification through support.

  1. Site visit and survey

    If the property already exists, we visit it; if it is still in design, we work from the drawings. The first visit or drawing review is at no cost. We note what you want to control, the investment range and the interior design style.

  2. Phased proposal

    You receive a proposal with brands, models and quantities, split into phases. With your architect and interior designer we decide which keypads and screens stay in view; the electronics go in the rack.

    What a Control4 integrator does
  3. Commissioning and support

    Our own staff installs the system, programs the scenes and calibrates audio and video on site. At the end we show you in person how to use it and leave you a reference video and the project documentation.

    Support levels
Smart home Guayaquil - DomuLab

Smart home in Guayaquil: frequently asked questions

How much does a smart home cost in Guayaquil?

Three variables set it: how many systems you want to integrate, the floor area and how far construction has progressed. The quote covers the full project: equipment, design, installation, programming, training and warranty. The first site visit and the proposal are free.

Can I start with one system and expand later?

Yes. The engineering is planned in phases: the rack keeps spare capacity and the audio is designed so zones can be added without redoing the installation. You can start, for example, with networking and lighting, and add security or a home theater later.

My project is already under construction. Is it too late?

Not while it is still at rough-in: at that stage conduit goes in without difficulty. If you are still at the drawing stage, even better, because the rack and network points are placed during design. During construction we inspect key stages with your electrician and hand over as-built plans at the end.

Do walls have to be opened to automate a finished house or apartment?

Work is kept to a minimum. We start by checking which conduit and raceways already exist and reuse them. Where they do not reach, Lutron RadioRA 3 lighting runs wirelessly from the existing boxes, and any cable still needed goes above gypsum ceilings or behind moldings. It takes longer than new construction; the finished system is the same.

If the power goes out, can I still check the cameras from my phone?

Yes, for as long as the UPS battery lasts and your internet provider keeps its service up, because the rack UPS powers the network and the cameras. Lights and air conditioning do not run on the UPS: they depend on whatever electrical backup the property has, which your electrician sizes.

How does support work once the system is installed?

Business-hours support comes with every project: Monday to Friday, 9:00 to 17:00, with remote diagnostics when the system allows it and a first response within 24 business hours. DomuLab Care plans add preventive visits. Care Plus also gives priority response, and Care Premium responds to critical incidents as soon as possible, within 24 hours at most. On Basic or Plus, if you write outside business hours, we pick it up on the next business day.

Which is better: Control4 or a consumer WiFi system?

It depends on how much you want to integrate. A consumer WiFi system works for a few devices, each with its own app. Control4 is an open platform that integrates more than 14,000 third-party devices in one interface, and it is only installed through a certified integrator. Before proposing replacements, we check whether your current equipment is compatible.

Tell us about your project in Guayaquil

Tell us whether it is a house, an apartment or an office, and which part of the city it is in. We schedule the first site visit at no cost to you.

Request a free quote
DomuLab Smart Home

Connect. Protect. Enjoy.

Take your home to the next level with our smart experience and careful design.

Need help? Message us!