Room acoustics calculator: reverberation, panels and modes
Work out your room's reverberation time, how many square meters of acoustic panels you need to reach 0.4 s, and which bass frequencies the room reinforces.
Drag the corner to change the length and width, or use the arrow keys. The thick line on the edge shows the panels.
Average reverberation (RT60), in seconds
Results
1.88 s
Very long
The average reverberation is 1.88 s, much longer than the 0.3 to 0.5 s range. You would need to cover about 24.7 m² with 50 mm panels to reach 0.4 s.
- Reverberation at 500 Hz · 1 kHz
- 1.72 s · 2.05 s
- without furniture or people: the real value will be somewhat lower
- Panels to reach 0.4 s
- 24.7 m²
- in total, 50 mm; with your current 0 m² you are 24.7 m² short
- Schroeder frequency
- 322 Hz
- below it the room modes rule, not the reverberation
- First mode: length · width · height
- 28.6 · 38.1 · 63.5 Hz
- the lowest frequency each dimension reinforces
- Modes that coincide (±3 Hz)
- 3
- 114 Hz (length and width) · 191 Hz (width and height) · 229 Hz (length and width)
Each line is a mode of one dimension. If two from different dimensions fall within 3 Hz, they reinforce each other and show in amber.
A cinema room that sounds the way it should?
We integrate the acoustic treatment, audio and control of your room from the plans. Tell us the dimensions and finishes and we will advise you.
Estimate for guidance. The final design is set by measuring the room on site.
A home theater with the best-chosen equipment can still sound bad for a single reason: echo. The calculator above estimates how long sound takes to die away in your room, how many square meters of acoustic panels are missing to reach a sensible time, and which bass frequencies the room reinforces. Move the corner of the plan and watch the results change.
How to use the calculator
- Enter the room dimensions (length, width and height), or drag the corner of the plan.
- Pick the finishes of the floor, the walls and the ceiling.
- Enter the square meters of glass, heavy curtains and acoustic panels you already have or plan to add.
- Read the average reverberation, the color of the gauge and how many square meters of panels are missing to reach 0.4 s.
- Look at the mode axis: the amber lines are modes from two dimensions that coincide and reinforce each other.
- Copy the link to share the result with whoever designs the room.
What reverberation is, and why 0.3 to 0.5 s
Reverberation time (RT60) is how long sound takes to fall by 60 dB after the source stops. In a home theater you aim for a short value, 0.3 to 0.5 s as a practical reference, so dialogue stays clear and the surround sound comes from the speakers and not from the walls. The calculator aims at 0.4 s.
Above 0.5 s the echoes blend with the direct sound. The calculator flags the room as “a bit long” up to 0.8 s and “very long” above that; the 0.8 s is our own practical criterion, not a standard.
How much each material absorbs
The absorption coefficient runs from 0 (the material reflects everything) to 1 (it absorbs everything). These are the values the calculator uses at 500 Hz and 1 kHz, the bands the average reverberation is calculated from. They are typical values from public acoustic absorption tables; those of your material may vary.
| Material | 500 Hz | 1 kHz |
|---|---|---|
| Tile | 0.01 | 0.01 |
| Vinyl | 0.03 | 0.03 |
| Wood (parquet) on a rigid base | 0.07 | 0.06 |
| Carpet on concrete | 0.06 | 0.15 |
| Painted concrete | 0.02 | 0.02 |
| Smooth plaster | 0.02 | 0.03 |
| Gypsum board | 0.06 | 0.05 |
| 6 mm glass | 0.04 | 0.03 |
| Heavy pleated curtain (about 14 oz/yd²) | 0.49 | 0.75 |
| 50 mm (2 in) fiberglass panel | 0.99 | 0.99 |
A room with tile, smooth walls and a lot of glass reflects almost all the sound. That is why, untreated, home theaters have long reverberation times.
A 6 × 4.5 × 2.7 m room, with panels
With a wood floor, gypsum walls and ceiling, and 43 ft² (4 m²) of glass, the 2,574 ft³ (72.9 m³) room has an average reverberation of 1.88 s. This is what changes as you add 50 mm panels:
| 50 mm panels | 500 Hz | 1 kHz | Average |
|---|---|---|---|
| 0 m² (0 ft²) | 1.72 s | 2.05 s | 1.88 s |
| 6 m² (65 ft²) | 0.95 s | 1.03 s | 0.99 s |
| 12 m² (129 ft²) | 0.65 s | 0.69 s | 0.67 s |
| 18 m² (194 ft²) | 0.50 s | 0.52 s | 0.51 s |
| 24 m² (258 ft²) | 0.40 s | 0.41 s | 0.41 s |
| 30 m² (323 ft²) | 0.34 s | 0.35 s | 0.34 s |
To reach 0.4 s you need about 24.7 m² (266 ft²) of panels, almost half (47%) of the free wall. With 8 m² (86 ft²) of heavy curtains, about 20 m² (213 ft²) of panels is enough.
Panels by room size
With the same finishes and 4 m² of glass, the panel area grows faster than the volume:
| Room | Volume | Average reverberation | Panels for 0.4 s |
|---|---|---|---|
| 4 × 3.5 × 2.6 m (13.1 × 11.5 × 8.5 ft) | 36.4 m³ (1,285 ft³) | 1.58 s | 11.7 m² (126 ft²) |
| 5 × 4 × 2.7 m (16.4 × 13.1 × 8.9 ft) | 54.0 m³ (1,907 ft³) | 1.76 s | 17.9 m² (193 ft²) |
| 6 × 4.5 × 2.7 m (19.7 × 14.8 × 8.9 ft) | 72.9 m³ (2,574 ft³) | 1.88 s | 24.7 m² (266 ft²) |
| 7 × 5 × 2.8 m (23.0 × 16.4 × 9.2 ft) | 98.0 m³ (3,461 ft³) | 2.03 s | 33.8 m² (364 ft²) |
| 8 × 6 × 3 m (26.2 × 19.7 × 9.8 ft) | 144.0 m³ (5,085 ft³) | 2.27 s | 51.0 m² (549 ft²) |
Finishes matter too
In the 6 × 4.5 × 2.7 m room, with no panels and 4 m² of glass:
| Floor / walls / ceiling | Average reverberation | Panels for 0.4 s |
|---|---|---|
| Tile / plaster / gypsum | 3.66 s | 27.1 m² (292 ft²) |
| Wood / gypsum / gypsum | 1.88 s | 24.7 m² (266 ft²) |
| Carpet / gypsum / gypsum | 1.61 s | 23.5 m² (253 ft²) |
| Carpet / plaster / concrete | 2.67 s | 25.5 m² (274 ft²) |
Carpet helps at 1 kHz, but it hardly changes the amount of panels: 50 mm panels absorb far more than any finish.
Axial modes and the bass
Between two parallel walls, bass sound forms standing waves. For each dimension, the axial frequencies are f = c / 2 · n / L, with c = 343 m/s, L the size of the dimension and n = 1, 2, 3…
In the 6 × 4.5 × 2.7 m room, the first modes are 28.6 Hz (length), 38.1 Hz (width) and 63.5 Hz (height). When two dimensions have a mode within 3 Hz of each other, that tone is reinforced. In this room it happens at 114, 191 and 229 Hz, because the dimensions have simple ratios (6 m is 4/3 of 4.5 m). Change the length or the width by a few centimeters and watch them move; at 5 × 3.5 × 2.7 m there is no coincidence at all.
The Schroeder frequency shows where the room stops being dominated by modes: below it, what you hear depends on where you sit. In the untreated room it is 322 Hz.
50 mm panels absorb the mid and high frequencies well and the bass much less. Bass modes are handled with bass traps, with different room dimensions or with equalization. To place the speakers of the system, use the Dolby Atmos layout calculator.
What else matters
- Furniture and people. The calculator does not count them. They add absorption, so the real value will be somewhat lower than the calculated one.
- Sabine’s formula. It is a model for a room with diffuse sound. With a lot of absorption, as when approaching 0.4 s, it tends to overestimate the time: treat it as an estimate on the safe side.
- Rooms that are too dry. Below 0.3 s the room sounds dull. You can compensate with diffusion or by removing some absorber.
- Where to put the panels. The calculator estimates the total amount, not the placement.
How it is calculated
- Volume and surfaces:
V = L · W · H, floor and ceilingL · W, walls2 · (L + W) · H. - Total absorption:
A = Σ S · α, in sabins (m²), at 500 Hz and at 1 kHz. Glass and curtains take up wall; panels take up the free wall and then the ceiling. - Reverberation:
RT60 = 0.161 · V / Ain each band, and the average is the mean of the two. - Panels for 0.4 s: the panel area with which the average reaches 0.4 s, leaving the glass and curtains as they are.
- Axial modes:
f = c / 2 · n / Lup to 250 Hz. Two modes from different dimensions coincide if they are within 3 Hz. - Schroeder frequency:
2000 · √(T / V).
The results are an estimate: confirm the dimensions and materials with whoever designs the room.
Frequently asked questions
How many panels do I need for a 6 × 4.5 m home theater?
With a wood floor, gypsum walls and ceiling, and 4 m² of glass, about 25 m² (270 ft²) of 50 mm panels to reach 0.4 s. It changes with other finishes: try it in the calculator.
What is RT60?
The time sound takes to drop by 60 dB when the source stops. The shorter it is, the less echo the room has.
Why does my room boom on one bass tone?
Probably an axial mode: a frequency that one dimension of the room reinforces. Check the calculator’s mode axis to see whether two dimensions coincide.
Does it work for a recording studio?
No. This calculator is aimed at home theaters and living rooms. A studio needs a more detailed analysis.
Want a room that sounds the way it should?
At DomuLab we integrate the acoustic treatment, audio and control of your room from the plans. If you already have the dimensions and finishes, tell us and we will advise you. To see how it all fits together, read the guide to home theater with Dolby Atmos and our home theater service.





