AC BTU calculator: capacity and monthly electricity cost
Work out the BTU/h a room needs from its floor area, sun, kitchen and people, the unit size that fits, and what its electricity use would cost per month.
Drag the point to change the m², or use the arrow keys. The gray line is the base table; the colored one includes sun, kitchen and people.
Assumptions
Results
9,600 BTU/h
12,000 BTU/h unit
For 35 m² you need about 9,600 BTU/h; the next commercial size is 12,000 BTU/h. With the assumptions below it would use about 144 kWh and cost about 14.40 USD a month.
- Capacity needed
- 9,600 BTU/h
- base table: 9,000 BTU/h
- Commercial unit
- 12,000 BTU/h
- about 1,000 W at full capacity
- Electricity cost per month
- 14.40 USD
- about 144 kWh a month
Climate control planned from the drawings?
We calculate the real load of the room and coordinate the air conditioning with the automation. Tell us about your project and we will advise you.
Estimate for guidance. The final design is set by measuring the room on site.
An air conditioner that is too small does not cool, and one that is too big switches on and off all the time, with more noise, more humidity and more wear. The calculator above estimates the BTU per hour a room needs, suggests the nearest commercial size, and works out, with assumptions you can change, what its electricity use would cost per month.
How to use the calculator
- Enter the floor area of the room in m², or drag the point on the chart.
- Pick the sun it gets: shade if it hardly gets direct sun, very sunny if it has big west-facing windows or a wall in the sun all afternoon.
- Mark whether it is a kitchen (or has an open kitchen) and how many people use it.
- Adjust the use: the tariff on your bill, the hours per day and, if you like, the duty cycle and the efficiency under Assumptions.
- Copy the link to share the calculation with whoever installs the unit.
How it is calculated
The base is the room air conditioner sizing guide from ENERGY STAR, meant for ceilings of about 8 ft (2.4 m). It gives a capacity by floor area, and the calculator converts it to m² (1 m² = 10.764 ft²):
| Floor area | Base BTU/h |
|---|---|
| 9 – 14 m² | 5,000 |
| 14 – 23 m² | 6,000 |
| 23 – 28 m² | 7,000 |
| 28 – 33 m² | 8,000 |
| 33 – 37 m² | 9,000 |
| 37 – 42 m² | 10,000 |
| 42 – 51 m² | 12,000 |
| 51 – 65 m² | 14,000 |
| 65 – 93 m² | 18,000 |
| 93 – 111 m² | 21,000 |
| 111 – 130 m² | 23,000 |
On top of that base, the same guide’s adjustments apply:
- Very sunny: +10%. Heavily shaded: −10%.
- Kitchen: +4,000 BTU/h.
- People: +600 BTU/h for each one from the third on.
The result is compared with the usual commercial sizes of a split unit (9,000, 12,000, 18,000, 24,000, 30,000, 36,000, 48,000 and 60,000 BTU/h) and the next one up is suggested. If the need fills more than 95% of the unit, the calculator warns that it is tight.
The monthly cost uses these assumptions, all editable:
- Electrical power:
unit BTU/h ÷ efficiency, starting at 12 BTU per Wh. - Monthly energy:
power × hours per day × 30 days × duty cycle, starting at 8 hours and 60%. - Cost:
kWh × tariff, with 0.10 USD per kWh as an example value. Use the tariff on your bill.
An example
A 35 m² living room with normal sun and three people starts from 9,000 BTU/h; the third person adds 600, so it needs about 9,600 BTU/h. The next commercial size is a 12,000 BTU/h unit. With the starting assumptions it would use about 144 kWh a month and cost about 14.40 USD.
More cases with the same logic:
| Room | Need | Unit |
|---|---|---|
| 20 m² bedroom, normal sun, 2 people | 6,000 BTU/h | 9,000 BTU/h |
| 35 m² living room, very sunny, 4 people | 11,100 BTU/h | 12,000 BTU/h |
| 25 m² kitchen-diner, 3 people | 11,600 BTU/h | 12,000 BTU/h |
| 60 m² open plan, 4 people | 15,200 BTU/h | 18,000 BTU/h |
How the cost changes
For a 12,000 BTU/h unit with the other starting assumptions:
| Change | Energy per month | Cost per month |
|---|---|---|
| 4 hours a day | 72 kWh | 7.20 USD |
| 8 hours a day (start) | 144 kWh | 14.40 USD |
| 12 hours a day | 216 kWh | 21.60 USD |
| 24 hours a day | 432 kWh | 43.20 USD |
| Efficiency of 10 BTU/Wh | 173 kWh | 17.28 USD |
| Efficiency of 16 BTU/Wh | 108 kWh | 10.80 USD |
| Efficiency of 20 BTU/Wh | 86 kWh | 8.64 USD |
More efficient units (inverter models, for instance) cut consumption, but the exact figure depends on the model and the use: take the number from the data sheet.
What the calculator does not see
It is an indicative estimate for planning. It does not replace a heat-load calculation (such as ACCA’s Manual J method), and a technician should do one when:
- the ceilings are higher than 2.4 m or there is a double-height space;
- there are large windows, glass without sun protection or a very exposed roof;
- the room has heat-producing equipment, such as a home theater or a rack;
- the space is larger than 130 m² or is split into several zones.
It does not account for humidity either: on the coast, a unit that dehumidifies well matters as much as the BTU.
From BTU to better-coordinated comfort
Choosing the right capacity is the first step. The second is coordinating the air conditioning with the blinds, the sensors and the scenes so you do not cool empty rooms; we cover it in Smart climate control in warm climates.
Frequently asked questions
How many BTU do I need per square meter?
With the ENERGY STAR guide, a 20 m² room starts at 6,000 BTU/h and a 40 m² one at 10,000 BTU/h, before the adjustments for sun, kitchen and people. It is not a fixed figure per m²: the table rises in steps.
What happens if I pick a bigger air conditioner than I need?
It switches on and off more often, dehumidifies worse and can be noisier. The size closest to the need is better, or an inverter that modulates its power.
Does the calculator work for any city in Ecuador?
The base is a general guide that does not tell cities apart. West-facing windows, coastal humidity or the altitude of Quito and Cuenca change the real load, which is why the sun is set by hand and a technician should confirm it.
Want climate control done with care?
At DomuLab we calculate the real load of the room and coordinate the air conditioning with the automation from the plans. Tell us about your project and we will advise you. Learn about our climate control service.





