IP camera calculator: storage, network and PoE
Work out the disk TB, the bandwidth and the PoE watts of your cameras, and how many days of recording fit in your NVR.
Drag the point to change the days, or use the arrow keys. The horizontal line is your NVR capacity: where they cross is the days that fit.
Results
11 TB
Fits your NVR
8 cameras for 30 days need about 11 TB and move 32 Mbps over the network. They fit in 2 of the 4 bays of your NVR, and up to 84 days of retention.
- Camera bandwidth
- 32 Mbps
- of 700 Mbps used at most of the link
- Total PoE power
- 56 W
- to size the PoE switch
- Space per camera
- 43.2 GB
- per day, without margin
- Disks needed
- 2
- your NVR: 4 bays of 8.0 TB; no redundancy
- Retention that fits
- 84 days
- with your NVR capacity (32 TB)
Surveillance sized right?
We size cameras, PoE network and storage from the plans. Tell us about your project and we will advise you.
Estimate for guidance. The final design is set by measuring the room on site.
Before buying an NVR or running the network for the cameras, three numbers are worth knowing: how many terabytes of disk you need for the days of recording you want, how much bandwidth the cameras move, and how many PoE watts they add up to. The calculator above gives you all three and tells you how many days fit in the NVR you already have.
How to use the calculator
- Enter the number of cameras and the average bitrate of each. You find it in the camera settings or its data sheet; the 2 to 8 Mbps shortcuts are only examples.
- Pick the time recording (100% is continuous recording) and the retention days, by dragging the point on the chart or typing the number.
- Enter your NVR data: the size of each disk, the bays, and the network link to it.
- Review the assumptions (margin, PoE power per camera and the share of the link used at most): they are in plain view and can be changed.
- Copy the link to share the calculation with whoever installs the system.
How it is calculated
- Space:
TB = cameras × Mbps × 86,400 s × days × % recording ÷ 8 ÷ 1,000,000, plus a margin for the file system and peaks. - Bandwidth:
Mbps = cameras × bitrate. - PoE:
W = cameras × power per camera. - Disks:
TB needed ÷ size of each disk, rounded up and without redundancy. - Days that fit:
NVR capacity ÷ TB per day.
The starting values are assumptions: a 4 Mbps bitrate, a 10% margin, 7 W per camera and up to 70% of the link. None is manufacturer data: the real bitrate depends on the scene, the codec and each camera’s settings.
An example
Eight cameras at 4 Mbps, recording all the time for 30 days, need about 11.4 TB with the 10% margin: 43.2 GB per camera per day. They move 32 Mbps over the network and add up to 56 W of PoE. With 8 TB disks you need 2; in a 4-bay NVR (32 TB) up to about 84 days would fit.
Space by cameras and days
With 4 Mbps per camera, continuous recording and a 10% margin:
| Cameras | 7 days | 14 days | 30 days | 60 days |
|---|---|---|---|---|
| 4 | 1.3 TB | 2.7 TB | 5.7 TB | 11 TB |
| 8 | 2.7 TB | 5.3 TB | 11 TB | 23 TB |
| 16 | 5.3 TB | 11 TB | 23 TB | 46 TB |
| 32 | 11 TB | 21 TB | 46 TB | 91 TB |
How much the bitrate weighs
For a single camera over 30 days, with the 10% margin:
| Bitrate | Per day | 30 days |
|---|---|---|
| 2 Mbps | 21.6 GB | 0.71 TB |
| 4 Mbps | 43.2 GB | 1.43 TB |
| 6 Mbps | 64.8 GB | 2.14 TB |
| 8 Mbps | 86.4 GB | 2.85 TB |
Recording only half the time (for example, on motion detection) halves the space: the eight cameras in the example drop from 11.4 to 5.7 TB.
What else matters
- Variable bitrate. A scene with a lot of motion or low light raises the bitrate; use the value of the demanding moments, not just the average.
- Redundancy. The calculator does not count parity or spare disks: add them according to the level of protection you want.
- Network. If the total gets close to the limit of the link, consider splitting the cameras onto another switch or link.
- PoE switch. The PoE watts are the sum of the cameras; the switch needs a comfortable power budget, and heat counts too.
Frequently asked questions
How many TB do I need for 8 cameras over 30 days?
At 4 Mbps per camera and continuous recording, about 11 TB with margin. Change the bitrate and the time recording to yours.
How much PoE power does an IP camera draw?
It depends on the model; the calculator starts from 7 W per camera as an assumption. Use the figure on your camera’s data sheet.
Does it work for 4K cameras?
Yes, but with their bitrate: higher-resolution cameras usually need a higher bitrate. Enter the one your camera shows.
Want a well-sized system?
At DomuLab we size cameras, PoE network and storage from the plans. If you already have your camera list, tell us and we will advise you. Learn about our perimeter security service.





